I’ve been looking, apparently in vain, for a good book (that’s not in German!) detailing Passive House building and modeling techniques. The best I’ve been able to do so far is Toward a Zero Energy Home, and it must have been pretty good, since I read it cover-to-cover in less than 24 hours. It’s not particularly dense or detailed, but it was a nice quick overview of low energy building systems, with lots of pretty pictures, and a dozen case studies from all over North America, including a couple right here in Boulder.
The goal that the authors have chosen to highlight — “Net Zero” — means that the buildings in question produce as much energy as they consume on an annually averaged basis. This necessarily means that they all have some on-site production, wind, PV, solar-thermal hot water, etc. However, to keep such projects reasonably cost effective, it’s necessary to focus first on energy efficiency measures. Most important among these is a very tight building envelope, much more insulation than code requires, and appropriate glazing for passive solar gain. Then the internal power loads need to be minimized, by using energy efficient appliances and LED or CFL lighting. Only after doing all that is it financially worthwhile to start adding on-site renewable generation, capable of meeting the overall annual energy demands of the dwelling. Financially worthwhile, that is, if you have already decided that you want to create a Net Zero building.
Continue reading Toward a Zero Energy Home by David Johnston and Scott Gibson